How to Use the Meiyingpu D2004W Non-Heating Overhead Stirrer
Overhead stirrer operation can be a concern, particularly for staff responsible for school laboratories. These instruments are widely used in laboratories, and careless handling by students can lead to frequent failures and a shorter service life.
Meiyingpu has prepared this article, “How to Use the Meiyingpu D2004W Non-Heating Overhead Stirrer,” to explain correct operation.
Operating the Meiyingpu D2004W Overhead Stirrer
Installation: Fit the support column into the base and tighten the retaining screw. Attach the cross clamp to the column, insert the main unit's horizontal support rod into the clamp and secure it.
Install the stirring shaft before use. It can be clamped directly in the chuck, provided it is straight, or connected using a flexible coupling.
Before starting, set the power switch to OFF and turn the knob fully counterclockwise to minimum. Plug in the unit and switch on. The switch indicator lights and the speed display reads “0000.” Slowly turn the knob clockwise to the required speed.
